Pre-installation Preparation
Determine Window Type and Opening Method: Before installation, clearly define the window type and opening method to ensure the appropriate window opener model is selected.
Check Voltage: Check whether the electric window opener operates on AC (220VAC) or DC (24VDC) to avoid burnout during commissioning.
Prepare Tools: Prepare installation tools such as an electric drill and screwdriver.
Installation Steps
Mark the screw hole positions: According to the dimensions shown in the window opener installation instructions, use a ruler and pen to accurately mark the screw hole positions for the window frame mounting bracket and the window sash mounting bracket of the window opener.
Drill holes and install the mounting brackets: Drill holes at the marked positions with an electric drill and install the window sash mounting brackets of the window opener.
Connecting the push rod: Connect the push rod of the window opener to the mounting bracket on the window sash using the pin, and then accurately tighten the screws on the window frame mounting bracket of the electric window opener.
Testing: Connect the power supply and test the window opener to check whether it is securely installed, whether it can close and lock the window sash tightly, whether the push rod touches the window frame, and whether the push rod extends in a straight line.
Installation Technical Requirements
Before installation, the window opener can be powered on and run once in a round trip to check its functionality.
When installing the window sash mounting bracket, the center of the bracket must coincide with the center of the window sash.
During the opening process, the rear of the window opener will swing with the mounting bracket; it must not come into contact with the window frame or other structural components.
